Sunday, June 3, 2012

how flash occurs on mould?

this post shows the flashing process occurs in the injection mold, in fact many things that influence the occurrence of the flash, but can be broadly divided into 3
1. material effect
2. Influence of the injection mold
3. Effect of mold conditions
for example, due to the influence of material, rubber and PP is certainly more difficult to control defects in flash because it has a low viscosity compared to PBT, or Xyron. because of mold flash, can be caused by several things, among others
1. mold core thickness is insufficient, causing deflection while receiving the injection from the nozzle. this can be avoided by calculating the estimated deflection and also adds support pillar between the bottom plate with the core plate.
2. machining is not good, if this happens core or cavity must be measured first, then rewelding and re-machining.
3. if for the wrong polishing process, so that the bumpy surface (waves), surface machining has to be repeated, is made insert core, can also rewelding.
of course, before doing the repair process because of flash, we must first check the cause, either in the injection process, and the molding itself.

23 comments:

This comment has been removed by a blog administrator.

CAD is more CPU/ RAM intensive than GPU. Unless you want to enable realistic shading/shadows (which you can't since it requires a workstation video card) or CAD extremely complex assemblies, the Intel GMA will handle it just fine.
drafting software

great post

I am new to plastic mold industry

Hope you will post more about Plastic Injection Molding

cheers

Mold texture also is very easy to create the mold "R" angle rounded so that more flash on the plastic sample. How to avoiding the flash in mold texturing .
more information from http://www.moldtexture.net/

great post. it show a litter reason of flash.
Can you see more injection mol
injection-molding-defect and give ideas


We are a plastic injection molding company in West Texas specializing in short runs and custom services.We can makinginjection mold with kind of modles!

This comment has been removed by the author.

Nice post .I have gained some information about how flash occurs on mould. Thanks and keep it up and hope you will post more information about Plastic Molds.

Thank you for sharing. Predictive Maintenance is necessary as part of an overall equipment maintenance program to build lasting return on investment and impact on asset health. For more info visit:- http://www.rotovacgroup.ca/

Thanks for your post because i gained new information from your post. i will visit again on this blog for new posts. Thanks.
Mechanical Engineering Ebook

Great post...... Remember that you are unique in this universe...... I came to know the informative information regarding mould treatment of this site. Would like to visit again.... Good luck for the next!. Thank you too much.... Please keep up posting......
mould prevention

Very Nice Blog And I Have Read Your Post It Is Veryn Useful For Thermic Fluid Heater. And Your Writting Style Is So Good Thank you For Post.




Such information about coat colour is used by film thickness makers and animators to give their models or animated creations a degree of extra realism.
It is also about where to emphasize and where to downplay based on the personality of the character in the film thickness.
For more information: film thickness

Thanks for your post because i gained new information from your post.

plastic injection molding 

It feels great to read something very deep and easy to understand, very nice work. We also providing injection molding facility

This blog is very good and I hope a lot of work will be done that you will continue to make such a blog.

mold china
injection molding china

Router Number Support is one of the best company which provides online or offline support services for router issues i.e. internet has been running slow, How to increase the security?, change bandwidth channel for better connectivity, losing connection too often, initiate port forwarding to your Xbox, update the firmware, etc. If you need our services then Dial +1-888-846-5560 router Support Number.

This comment has been removed by the author.

Brilliant, This gives me very useful information. Thanks for sharing this with us. Best Plastic Injection Molding Company

Thank you so much such a nice blog writing, directpointelectrical We are a team of expert Electrician offering wide range of electrical services in Australia and we offer premium support to our customers in Australia. directpointelectrical team has become the world leader in electrician filled. Electrician Dandenong